Archive for January, 2012

North Florida SM Candidates

There have been a number of emails flying around over the past couple of days that I have been copied on – names are not material, but the gist of the subject revolves around who might be qualified for the job versus what attributes we look for in a new Section Manager. To my understanding, Paul (KJ4G) may not run for another term – there are at least a couple of amateurs who have expressed interest in pursuing the position. I only know one of the potential candidates  - but regardless of who runs, I have begun to think about the kind of person whom I want to represent me in the North Florida Section. Of course, qualifications from a skills and experience set are important, but there are other “qualities”, attributes if you will, that I will be looking for and evaluating. As I began the thought process, I started listing those attributes and experiences in an email addressed to the folks on the original email list. As I read the email over-and-over again, I came to the conclusion that perhaps others would benefit from the dissertation, so I publish it openly here with very minor changes to protect the identity of individuals (where necessary).

..
The electoral process is serious – each of us has our own criteria, biases and preferences, so this is not meant to sway anybody’s opinion – only to share one person’s perspective.

 

..  EXCERPTED from a response to a closed-email chain – 20-January-2012

—————–

With regard to SECTION MANAGER, allow me to share some thoughts about the job and the attributes of someone I would be looking for to represent me in high office :

 

  • You have to be an EMBRACER OF CHANGE – saying that you only like 2 meters, HF and CW is just not enough nowadays. YOUR personal opinions and preferences really do not matter – you are here toPROMOTE ALL OF AMATEUR RADIO. Of course, you may not be an active participant in any or all of the digital or other modes (including satellite, spread spectrum, etc), but saying that you wouldn’t oppose something is TACIT DISAPPROVAL – that’s really not the role of a SM.
    ..
    Paul was always faulted for promoting D-STAR. As all of you know, I’m a major DSTAR proponent and invested in the technology – but Paul’s fault wasn’t that he promoted it – but rather that he was perceived to ONLY promote DSTAR (which was not true). What people failed to give him credit for was that he EMBRACED new technology – and eventually openly embraced WL2K and other digital technologies after many years of lobbying by Bud and others.
    ..
  • You have to be a FULL-TIME PUBLICIST and CHEER-LEADER – always stumping for Amateur Radio and the ARRL. Great people skills and a fearless attitude toward “getting the word out”, both internal AND EXTERNAL are hugely important.
    ..
    We, overall, do a very poor job of external communications and public relations. The new SM needs to change that – NOT by being the face, but by creating initiatives that will get amateurs involved, excited and active – regardless of the technology – then trumpeting their progress and success in an interactive, engaging medium to all members in the section.
    ..
    We have done a very poor job of getting the word out – relying on “old technologies” like driving hundreds of miles, or using the website (very infrequent changes). Today’s SM needs to be a MASTER COMMUNICATOR, using all of the latest tools, mediums and technology, like WebEx, Conference Calls, BLOGS and VIDEO to get the word out about activities, progress and accomplishments within the section.
    ..
  • You have to be a part-time COUNCELLOR – motivating the best and the brightest to take positions of responsibility, but also mentoring and lifting-up those who are down-trodden and have felt disenfranchised due to past injustices.
    ..
  • You have to be a part-time SURGEON – willing, able and skilled to cut out the “cancer” where it exists within our leadership team, as well as the rank-and-file. Nobody likes to invoke discipline, or perform organizational realignments, but the SM and all of their staff – need to be strong leaders and find the best-of-the-best to lead the organization. One bad apple can ruin the entire basket.
    ..
  • You have to be a part-time EXPLORER – sometimes with no particular destination in mind. The SM needs to instill a spirit of adventure and experimentation, of asking
    ..
    “.. what if we tried this (or that)..??”, or
    “… who might be able to do this..?”
    ..
    Trying and failing is not to be faulted –  FAILING TO TRY is much worse.
    ..
  • You have to be a full-time HEAD-HUNTER – constantly recruiting, looking for the best experience, best talent for jobs that need to be filled. The Good-ol-Boy’s network just doesn’t work for the future. There is a wealth of new talent in the section – new licensees, young licensees – these folks look at the world with different eyes – we need to harness that spirit of adventure and that fearlessness – before they find other places and other hobbies that fulfill them.
    ..
  • You have to be a full time TEAM-LEADER – focusing attention on the team, not on yourself. I believe that the SM’s legacy is built on the team that he/she puts in place – on the positive movement that they implement, on the excitement that they generate – NOT on the speeches that are delivered, or the number of hamfests attended. The PERSON of the SM is immaterial to most of us – we want to see CHANGE, EXCITEMENT and RECOGNITION for the things that the entire amateur community does in the section.
    ..

While no single person can perform all of these tests or fill of these roles with equal excellence, it will be incumbent on us as the voting membership to prioritize the experience and characteristics of the candidates based on what we perceive to be high priority items.

..

As a growing number of people line-up to run for SM (sick humor), let me share with you who I will be looking for (aside from meeting the above “qualifications”) :

..

  • Someone who has accomplished a great deal in their professional or personal life – a person who has strived to be the best-of-the-best, regardless of field (including wives and mothers, since that is arguably one of the most difficult “professions”)
    ..
  • Someone who has a long record of MENTORING others – whether in teaching one-on-one sessions, or being a prolific writer and sharing their knowledge just for the joy of sharing. Do you take people under  your (ham) wing and try to give them new experiences, make them better and groom them in the hobby..?
    ..
  • Someone who has a long record of working Public Service Events with Amateur Radio – both for the recognition that it gives to Amateur Radio, and because it provides valuable training opportunities for our teams. Net Control, passing traffic, net discipline are all highly perishable skills which need to be honed and practiced on a regular basis. Working under pressure with multiple unknowns, as is common during public service events, is extremely valuable to non-experienced amateurs.
    ..
  • Someone who has a record of “pushing the envelope” – trying new things, doing things that others said couldn’t be done. I love people who are never satisfied with things “the way they are”, versus “the way it could be” and embark to make the necessary changes. That “drive” and a sense of constant improvement is both contagious and inspiring in the amateur community.
    ..
  • Someone who talks about WHAT NEEDS TO BE DONE (MISSION FOCUSED) and how they expect to tackle the challenges, versus who THEY are and what their “qualifications” might be..
    ..
  • Someone who is focused on BUILDING TEAMS, rather than kingdoms – I believe that much of the “cancer” of amateur radio is due to a perceived sense of “entitlement” by some individuals who have held appointed positions for far too long. Their focus has been on maintaining the status-quo and therefore keeping their empire in-tact, versus advancing the entire amateur community.
    ..
  • Someone who is focused on EXCELLENCE – I have become famous for coining the phrase “.. we may be called Amateur Radio Operators by the FCC, but we don’t need to be amateur-ish in the way that we conduct ourselves”. This is especially true given the new crop of licensees – we need to LIFT THEM UP and encourage them to conduct themselves professionally – it builds self-esteem, as well as positive recognition for our hobby and community.
    ..
  • Someone who DOESN’T WANT THE JOB – and has to be arm-twisted into taking it. I’m not kidding here. I question the agenda those who want a political job – one that pays nothing, that has more headaches than rewards and one where everybody is a critic. To me, those that do politically maneuvering in order to garner the position are even more questionable.
    ..

These are only my thoughts – each ARRL member will have their own evaluation criteria. Sharing my thoughts is only meant to give one person’s perspective – not to imply any other agenda.

..

best regards to all of you..

..

Mike – WB6RTH
20-Jan-2012

KA4RES (Palm Coast) changing Frequency

some time in February, the KA4RES D-Star repeater in Palm Coast, FL will be changing frequency to 145.320 -600khz, while maintaining the same call-sign (for RPT1 and RPT-2). Over the last two years, we have been operating on a frequency for which we were not officially coordinated, since the current 147.320 frequency was used before we got official coordination.

..
Steve (KD4DNQ) and Rick (KC2HFL) will be retuning a replacement duplexer, after which we will swap the frequencies (the RF module is changed using a PC). The system should only be off the air for about 45 minutes as we bolt-on the new duplexer to the rack and reconnect the cables.

..
We’ll give a 7-day notice before the swap, but you can already program your radios for the new frequency and store the entry into a new memory.

Elecraft P3 SVGA/FFT Card Available for Order

With shipments projected to start on 21-Feb. This is the add-on card to an Elecraft P3 which will drive an external, wide-screen monitor to give a huge pan-adapter screen. But there’s more – decoded CW and RTTY/PSK will also be displayed on the external screen. Future firmware upgrades (free) will allow for a USB keyboard to be attached in order to SEND digital modes without an attached computer. This is the add-in card that I have been waiting for, since it will give wide-screen display of both spectrum and waterfall. Pictures below. Selling price is $259.95 – a steal..!!

..
Disclosure statement : I am an Elecraft convert and have virtually everything that they manufacture. Although I have no financial interest in the company, I am biased toward spreading the news of Elecraft because of the quality of the products, the principles of the company and the quality of their staffs’ support of their customers.

..

P3 SVGA Wide Screen Video Adapter with High Performance FFT Processor

Click pictures to enlarge

p3svga1.jpg (288248 bytes) p3_svgapcb.jpg (223334 bytes)
P3_SVGA Large Screen Adapter for the P3

(Up to 1920 x 1080p)

P3_SVGA PCB

(Plugs into any existing P3)

The P3SVGA adapter adds wide screen display capability to the P3 (up to 1920x1080p). It also has a dedicated high speed FFT processor that performs a 2048 point FFT in parallel with the P3′s existing processor, for a much higher frequency resolution per dot display on the larger screen. The P3SVGA adapter is a plug-in internal card to the P3 that can be easily added by the user.The P3SVGA also includes an interface for our future USB keyboard option that will allow direct digital mode operation via the K3 and P3, with data display on the P3 and P3SVGA screens.

Currently supported native screen resolutions  (other resolutions may be added in the future):

  • 1024 x 768
  • 1280 x 1024
  • 1440 x 900
  • 1600 x 900
  • 1920 x 1080

Note: Most other resolution flat screen displays also support the next lower P3 screen resolution.

Like the P3, the P3SVGA is firmware downloadable and new features will be available over time.

The P3SVGA is now available on our order page. Its estimated starting ship date is Feb. 21st.

 

Time for Antenna Maintenance

The cool (but not COLD) temperatures are ideal for antenna work here in Northern Florida. Eddie and I did some maintenance on  EMCOMM-1′s fiberglass antenna mast on Sunday and all went well. The mast is rigged for 46-feet maximum height, yet collapses to 8-feet to remain under the trees and road obstacles.

..
We’ll need to do some work on the OCFD wire antenna in the next couple of weeks as well. HF bands are booming and we want to take advantage of the cooler weather to optimize the antenna system. We have the Pneumatic Antenna Launcher, which we’ll put to the test for redeploying the center point of the antenna – should make for easy (and quick) work.

..
We also reconfigured the station inside for better (easier) SO2R operation – pictures to follow later.

ARRL CHILDREN’S DAY 2012

A mild winter day in NE FL brought brought Boy Scouts and other youth to Hershel King Park to learn about Amateur Radio. The ARRL Children’s Day event was hosted by Flagler ARES and FPCARC and the turn out was great.

Children of all ages were able to get on the air using various modes and make contacts all over the world. The goal of the event was to foster interest in amateur radio and help the scouts complete merit badge requirements.

Both organizations are active in educating youth and hope to participate in more events like this throughout the year. The goal is to educate children and hopefully gain some new licensees.

To learn more about both organizations Please contact Flagler ARES at info@flaglerares.net and Flagler Palm Coast Amateur Radio Club at fpcarc@gmail.com

Set Up.